Model 2048
Stainless Steel Lumpbuster with a 20 HP motor. The screen is 1/4″ thick with 1″ diameter holes for sizing the material. We cut the screen on our waterjet.
Model 1515
Model 1515 stainless steel lumpbreaker mounted on a carbon steel elevated base with a stainless steel lined through hole.
Finger Pattern Design
Typical finger pattern design used in all lump busters. (other optional designs can be used for special applications)
Model 2448
Model 2448 Carbon Steel. Lump Buster. Under Construction
Model 2020
Model 2020 stainless steel lumpbreaker mounted on a round plate.
Sizing Screen
This is are typical sizing screen. They are custom made with round holes or slots to fit the customers requirements.
Model 2048
Model 2048 Carbon Steel Lumpbuster with 20 Hp motor with custom inlet hopper.
Model 2020
Model 2020 Sanitary stainless steel Lumpbuster with a direct drive gear reducer and a 15 HP motor.
1515 Stainless Steel
1515 Stainless Steel Lumpbuster with custom hopper on a carbon steel stand with a stainless steel lined through hole
Model 2020
Model 2020 Carbon Steel Lump Buster 380 Volt 50 hertz 15 HP Motor
Model 2048
Model 2048 Stainless Steel Lump Buster on a carbon steel elevated stand with a stainless steel lined through hole 575 volt 3 phase 60 Hertz 20 HP Motor
1515 Stainless Steel
Inside view of a Model 1515 Stainless Steel Lumpbuster with custom stainless steel hopper and breaker bars with cross pins for sizing the material
Model 1515
Model 1515 Carbon Steel Lumpbuster with special hopper and custom gray paint
Model 1717
Bottom view of a Model 1717 lumpbuster screen
1515 Carbon Steel
Model 1515 Carbon Steel Lumpbuster with 560 volt motor for Canada
Model 3636
Model 3636 Carbon Steel Lumpbuster with 40 Hp motor for breaking up lumps in powdered cement.
Model 2028
Model 2028 Stainless Steel Lumpbreaker with 15 Hp motor for breaking up lumps in powdered chlorine.
Model 1515
Model 1515 Carbon Steel Lumpbuster with belt drive. Inlet is to adapt to a 12″ round flex pipe.
Model 3636
Model 3636 Stainless Steel Lumpbuster® with a 40 Hp motor, direct drive. The sizing screen has 2″ dia. holes.
Model 6464
This is our model 6464 Carbon Steel Lumpbuster® which is 64″ x 64″x 30″ tall. This unit has 3 shafts, direct drive 30 hp motor with gear reducer. The unit will be used to break up frozen bails of peat moss. The sizing screen in this unit has 2″ dia. holes and is 3/8″ thick.
Model 3030
This is our Model 3030 Carbon Steel Lumpbuster with a 30 HP motor and a 3/8″ diameter hole screen for sizing the material.
Model 1212
Stainless Steel Lumpbuster® with a 3 Hp Explosion proof motor, direct drive. The sizing screen has 1/4 dia. holes.
Model 2424
Carbon Steel Lumpbuster with a 20 HP motor and a 1/2″ diameter hole screen for sizing the material.
Model 1515
Stainless steel Lumpbuster with stainless steel hopper with cover and limit switch. It is mounted on a steel elevated base with casters.
Model 2020
Model 2020 stainless steel lumpbuster installed at a pharmaceutical facility.
Model 2424
Stainless Steel Lumpbuster with a 20 HP motor and a 1/2″ diameter hole screen for sizing the material. This unit has the side removal screen option.
Model 2424
Here are 3 more Stainless Steel Lumpbusters with a 20 HP motor and a 1/2″ diameter hole screen for sizing the material ready to ship. These units have the side removal screen option.
Model 2020
Carbon Steel Lumpbuster® with a 15 HP motor and a 3/16″ diameter hole screen for sizing the material and a custom inlet hopper. This unit has the side removal screen option.
